碳、氮源对PVA降解混合体系降解能力的影响及PVA降解机理初探

以能完全降解1g／LPVA的一个混合体系为研究对象，研究了碳、氮源对该混合体系降解PVA的影响。实验表明，补充有机氮源有利于混合体系菌体的生长，并且能提高混合体系对PVA的降解能力。进一步的研究发现，其它碳源的补充有利于菌体的生长，但对混合体系降解PVA产生一定的抑制作用。根据初步研究结果推断，该混合体系所产的PVA降解酶主要结合在细胞膜上，部分PVA进入细胞后被降解。     

急性等容性血液稀释对肝脏手术纤维蛋白降解产物D-二聚体和凝血功能的影响

目的探讨急性等容性血液稀释(ANH)对肝脏手术纤维蛋白降解产物D二聚体和凝血功能的影响。方法肝脏手术患者60例随机均分为三组,Ⅰ组行ANH,红细胞压积(Hct)为30%;Ⅱ组行ANH,Hct为25%;Ⅲ组为对照组不行ANH。所有行ANH患者均经肘部静脉或其他大静脉采血,放血时间为15～30min,血液存于含PCD的采血袋;下肢同步输注等容量6%羟乙基淀粉(HES),直到Hct降至30%或25%,并维持血液动力学稳定。所采集的血液室温保存于手术室,结合术中失血量和循环情况在手术结束前行自体输血;分别于ANH前、ANH后30、60min、手术结束和手术后12h采静脉血测定血小板计数(Plt)、凝血酶原时间(PT)、凝血酶时间(TT)、纤维蛋白降解产物D二聚体和Hct。结果Ⅰ、Ⅱ组术中出血量较Ⅲ组显著减少(P<0.05);Ⅰ、Ⅱ组ANH后和术中PT、TT较Ⅲ组显著延长(P<0.05,P<0.01),Plt显著下降(P<0.05,P<0.01),但仍在正常范围内,回输自体血后上述指标明显恢复,手术野和切口无异常出血;三组D二聚体无明显改变(P>0.05)。结论术前对肝脏手术患者进行ANH至Hct降至30%～25%之间是安全的,对凝血功能和纤溶系统无明显影响且可减少术中出血量。     

CAD基因原核表达载体的构建及表达产物的活性鉴定

目的构建pCool—GST—ICAD／CAD的表达载体，并存大肠杆菌BL21（DE3）中表达具有生物学活性的CAD核酸酶？方法用PCR扩增CAD基因，将扩增产物克隆入pCool—GST—ICAD载体中构建出pCool—GST—ICAD／CAD表达载体。经酶切和电泳鉴定正确后，在大肠杆菌BL21（DE3）中诱导表达，表达产物经亲和层析、离子交换层析及凝胶过滤等方法分离纯化。最后用SDS—PAGE和DNA降解实验进行鉴定。结果构建了pCool—GST—ICAD／CAD原核表达载体，重组载体转化后表达出毫克级水平的GST—ICAD／CAD蛋白复合体。经分离纯化后得到纯度很好的CAD—ICAD篮白复合体，在SDS—PAGE电泳上旱现清晰的两条蛋白带。经DNA降解实验证明纯化所得的CAD蛋白具有非特异性降解DNA的核酸酶作用。结论成功制备了具有生物学活性的CAD核酸酶，为进一步研究细胞凋亡的作用机制提供了有效的制剂。     

Interactions of small polypeptides with dimyristoylphosphatidylcholine monolayers: effect of size and hydrophobicity

The effects of size and hydrophobicity of small (molecular weights below 2,000) polypeptides on their predominantly hydrophobic interactions with a neutral phospholipid monolayer were studied. The changes in surface pressure were determined when various concentrations of Gly, Gly-Gly-Gly, -Ala, -Ala- -Ala- -Ala, -Ala-Gly-Gly-Gly-Gly, -Phe- -Leu- -Glu- -Glu- -Leu, adrenocorticotropic hormone fragments 1–10 (ACTH-(1–10)), porcine β-lipotropin, -endorphin and human fibrinopeptide A were injected under dimyristoylphosphatidylcholine (DMPC) monolayers at an initial surface pressure of 10 dyne/cm. In all cases, when peptides with the same number of residues are compared, the concentration needed to increase the surface pressure of the film by 1 dyne/cm was inversely related to its hydrophobicity. A reasonably good correlation was found to exist between the calculated free energy of transfer of a polypeptide from ethanol to water (a measure of its hydrophobicity) and its ability to increase the surface pressure of the DMPC film (a measure of the extent of its interaction with the neutral lipid monolayer).     

The growth of the second underpotentially deposited silver layer on Pt(100)

The electrodeposition of Ag on Pt(100)-(1 × 1) in perchlorate electrolyte was studied by means of time-resolved in situ scanning tunnelling microscopy (STM) and cyclic voltammetry. One monolayer of Ag is deposited underpotentially (upd) ca. 500 mV positive of the Ag⁺/Ag equilibrium potential. Several millivolts positive of the equilibrium potential, a second well defined upd layer forms. Its growth was observed to proceed via island formation and coalescence. This process occurs in two separate stages that manifest themselves in voltammetric peaks as well as in the STM images.     

重组人生长激素降解产物的检测分析

本文详细介绍了Ｓ－Ｂ电导率模型确定泥质砂岩储层含水饱和度的基本原理以及相应参数的确定方法。用该方法处理了大庆地区的树１３１井、萨南５丁４－检１３２井及杏９丁３检１３４井的一些层位，并将求得的含水饱和度与岩心分析的含水饱和度进行了对比，吻合得比较好。这说明了应用Ｓ－Ｂ模型确定储层的含水饱和度是可行的，结果比较好。     

The decay of house dust mite allergens, Der p I and Der p II, under natural conditions

Background: Fluctuations in the level of mite allergens in domestic house dust are the result of changes in the balance between synthesis, removal and decay. Purely physical forces as well as enzymatic degradation, mediated by house dust inhabiting microbes, may contribute to the decay of allergens in domestic dust. Knowledge about the speed of decay is essential for an understanding of the dynamics of allergen levels. Objective: The present study is a quantitative assessment of the speed of decay at nine combinations of temperature (15°C, 20°C and 25°C) and relative humidity (33%, 55% and 75%). Methods: Samples of mite infested material of an old rug were stored at these temperature/relative humidity-combinations for 6, 12 or 18 months, after the mites were killed by cither a freezing treatment or an acaricide (lindane). The microbes living in the rug presumably survive these treatments. Concentrations of Der p I and Der p II + Der f II. in extracts of the rug material, were measured by a radio immunoassay. Results: No significant changes in the levels of Der p I and Der p II +Der f II, could be detected even after 1¹/₂ year at a high temperature and humidity. Conclusion: These findings incidate that mite allergens can be extremely stable under normal domestic circumstances.     

Thickness effects of a carbon-supported platinum catalyst layer on the electrochemical reduction of oxygen in sulfuric acid solution

The influence of the thickness of a carbon-supported platinum catalyst layer on the oxygen reduction reaction (orr) has been studied in sulfuric acid solution by means of a thin-film rotating disk electrode. Pronounced changes in the Pt utilization, electrode activity and the orr kinetics have been observed upon varying the catalyst layer thickness. The thicker film electrode exhibits a higher Pt utilization efficiency and higher activity, and promotes the orr kinetics at potentials relevant to fuel cell operations. The participation of Pt surfaces not in contact with the electrolyte solution in electrochemical reactions via the spillover of adsorbed hydrogen and oxygen species, is proposed to be responsible for the changes. The thicker catalyst layer is likely to modify the Pt particle–particle distance by providing shared Pt sites between adjacent carbon supports, to improve the surface density of active catalyst particles per single carbon support by sharing adjacent catalyst sites, and to increase the ratio of the particle surfaces free of blocking anions to the catalyst|electrolyte interface surfaces. The carbon-supported platinum catalyst layer becomes active at 0.90 V vs RHE only when the catalyst layer is thicker than 1 μm. To provide reasonable activity, the minimum catalyst layer thickness should be around 2–4 μm. These results should be considered in the design of the cathode catalyst layer of polymer electrolyte membrane fuel cells.     

胶片剂量测量和验证方法的研究

目的设计和实现基于通用激光扫描仪的胶片剂量测量和验证系统。方法采用胶片饱和冲洗、非线性光学校正、多分辨率阈值滤波、离散傅里叶逆变换图像复原等方法,消除了普通扫描仪用于胶片剂量学定量处理中的各种伪影、噪声和畸变;采用过响应系数校正方法消除测量胶片对低能散射光子的过响应,改善了胶片剂量测量的准确性;采用γ结合NAT指标的方法对放疗计划进行二维定量验证,给出可视化图形表达和具有定量数据的验证结果。结果和三维水箱系统、VeriSoft胶片测量系统相比较,研制系统对放疗剂量的测量结果在±2%内符合一致,对IMRT放疗计划的定量验证结果在±3%内符合一致。结论该系统能够实现对放疗剂量的高精度测量和对适形调强放疗计划剂量的可靠验证。